Step 1: Connect your router to the ONT (Fibre device on your wall) via an Ethernet cable. This should go in the blue WAN port in the Router and typically in the GE1/LAN1 port in the ONT device, although this port may change depending on the number of services active at your property. Ensure nothing is plugged into the grey DSL port in the router.
Step 2: Log in to your HG630b
Browse to the login pagehttp://192.168.1.254
Username: admin
Password: admin
Step 3: Click "WAN" on the left, then select "SPARK_FIBRE" in the centre of the page.
Set the Connection Type to "IP_Routed (IP)"
Set Access Type to "DHCP"
Step 4: Click Save, Your router is now correctly configured.
Comments
0 comments
Article is closed for comments.